How to Apply DTF Transfers

✅ DTF Application Requirements:

Step Setting
Temperature 300°F (150°C)
Pre-Press 5 seconds
Main Press 15 seconds (medium pressure)
Post Press Optional (for matte or extra durability) – 5–10 seconds

⚠️ Important: Always test on a sample garment first, especially if using specialty materials like polyester blends or textured fabrics.

🔧 Step-by-Step: How to Apply DTF Transfers

1. Set Up Your Heat Press

  • Set your heat press to 300°F

  • Adjust to hard pressure

2. Pre-Press the Garment (5 seconds)

  • Pre-press your blank garment for 5 seconds

  • This removes moisture and wrinkles for better transfer adhesion

3. Position the DTF Transfer

  • Place the transfer design side up on your garment

  • Use heat tape if needed to hold it in place

4. Press the Design (15 seconds)

  • Apply firm and even pressure for 15 seconds

  • Use a Teflon sheet or parchment paper if preferred

5. Cool Peel or Hot Peel (Check Label)

  • Most of our transfers are hot peel – wait 5–10 seconds and peel gently

  • For cold peel, wait until the transfer is completely cool before peeling

6. Optional Post-Press (5–10 seconds)

  • Post-press with a sheet for extra durability or a matte finish

👕 Works Best On:

  • Cotton

  • Cotton/Poly blends

  • Polyester

  • Canvas & Tote Bags

🛒 Need Transfers?

Browse our ready-to-print gang sheets, custom DTF orders, or UV DTF stickers — all available with same-day service in Richardson & Arlington, TX.